Types of products

Addons

Products

Product Filter

Venus

Zhafir Venus Series

Zhafir Venus Serie 400 - 6500 kN Flexible, full-electric solution

  • Full-electric machines
  • The most technology-advanced series
  • Control system from SIGMATEK (Austria)
  • Parallel movements
  • Accuracy level is one level above of hydraulic machines values
  • High quality components
  • Energy cost-saving rates reaching up to 80%

ASSIGNED CATEGORY

Injection moulding machines
More about this product
Zeres

Zhafir Zeres Series

Zhafir Zeres Serie 400 - 5500 kN Electric machine with hybrid solution for nuclear function

  • Hybrid pole machines
  • Processing unit SIGMATEK Austria
  • Parallel movements
  • Aaccuracy is one level above the hydraulic machines accuracy values
  • High standard equipment
  • Servo-electric engines

ASSIGNED CATEGORY

Injection moulding machines
More about this product
Mars

Haitian Mars Series

Haitian Mars Serie 600 - 10000 kN Joint clamping

  • Processing system KEBA
  • Equipped with constant gear pump powered by synchronic servo engine with revolution controlling frequency convertor
  • Significant save of electrical energy
  • Extremely silent performance of the hydraulic unit

ASSIGNED CATEGORY

Injection moulding machines
More about this product
Jupiter

Haitian Jupiter Series

Haitian Jupiter Serie 4500 – 66000 KN 2-plated clamping

  • Short 2-plated clamping unit with direct hydraulic motion
  • Hydraulic units are equipped with energetically highly efficient combination of gear pump powered with synchronic servo engine with revolution controlling frequency convertor
  • Minute in dimension

ASSIGNED CATEGORY

Injection moulding machines
More about this product
GRS180

GRS

Better slanted, well-tried thousandfold Into the large intake and then into the tilted rotor. There every kind of granulate is reliably granulated. The GRS granulators run in peak operation right from the start.

ASSIGNED CATEGORY

Robots
More about this product
RS1615

RS 1600

Diversity by request As unique as the place of use: The granulators can be equipped and adapted individually. For example, with hoppers and material containers depending on the task at hand.

ASSIGNED CATEGORY

Robots
More about this product
RS3009

RS 3000

Mid-market with a punch The ergonomically constructed granulators attain throughputs of up to 500 kg/hr in continuous operation depending on the model - whether in injection moulding operations or next to blow moulding machines.

ASSIGNED CATEGORY

Robots
More about this product
RS3806

RS 3800

Diversity on request The RS 3800 series is the logical refinement of the well-proven RS 2400 and RS 3000 and offers the same advantages. It is flexible in use thanks to various rotors, hoppers and peripheral equipment.

ASSIGNED CATEGORY

Robots
More about this product
RS4500

RS 4500

Devours large volumes quietly With the aggressive intake zone in the cutting chamber, seizes even thick-walled stock outages or large hollow shapes reliably; the noise level remains low.

ASSIGNED CATEGORY

Robots
More about this product
RS6000

RS 6000

True greatness, tailor-made The successful central granulator for all areas of plastic granulation. Unbeatable when it comes to granulation of large parts in the injection- and blow moulding sector. Makes short work of scrap web rolls, extruded plates, bumpers, thick-walled pipes or extruder scrap.

ASSIGNED CATEGORY

Robots
More about this product
Spark

Sprue Pickers

The SPARK and PIRANHA model manipulators have both been designed mainly to extract sprues from moulds: using these devices allows both the automatic separation of the sprue, as well as the immediate recycling of the material. Moreover it is guaranteed that the sprue will not remain inside the mould when it closes.

ASSIGNED CATEGORY

Granulators
More about this product
Micro

Micro

The MICRO CNC robot respond in a flexible and economic way to the most demands in the small injection moulding machines. The Free Guided Programming (FGP) capability, that all TecnoMatic robots have, makes it possible to realise extremely flexible work cycles with no limitations to program complexity or length; all the various operations are very simple.

ASSIGNED CATEGORY

Granulators
More about this product
Compact

Compact

The CNC robots in the SMART series are the ideal partners to automate standard processes for injection moulding of thermoplastics. The optimisation of the manufacturing techniques combined with the choice of the best components allows exceptional value for money to be achieved.

ASSIGNED CATEGORY

Granulators
More about this product
Steel

Steel

The high performance linear robots of the STEEL series represent the culmination of over 30 years of activity by TecnoMatic in plastics moulding automation. This series is the result of constant evolution both as regards the mechanical and electronic parts. The high speed, vibration control and high load capacity place this series at the highest technological levels.

ASSIGNED CATEGORY

Granulators
More about this product
MR-H

MR-H & MR-H FC

Modular air-cooled industrial water chiller, with cooling capacities from 60 a 604 kW, suitable for outdoor installation, equipped with stainless steel water pump, pressurized vessel, stainless steel plate evaporator, axial fans. Models with one, two and four compressors, with one or two refrigeration circuits.

ASSIGNED CATEGORY

Coolants
More about this product
MR

MR & MR FC

Air-cooled modular industrial chillers free-cooling, with cooling capacities from 11 to 56 kW, suitable for indoor and outdoor installation; complete with stainless steel water pump, pressurized vessel, stainless steel plate evaporator, axial fans. Free-cooling chillers characterized by a very small footprint, particularly suitable for installation close to the processing machine.

ASSIGNED CATEGORY

Coolants
More about this product
MEC

MEC

Air cooled industrial water oil chillers, with cooling capacities from 3,5 to 10 kW designed for various applications such as machine tools, high speed spinale, EDM machines, laboratory apparatuses. Chillers suitable for the cooling of different fluids such as glycol and water mix, hydraulic oils, cutting fluids.

ASSIGNED CATEGORY

Coolants
More about this product
Multi

Uni, Twin & Multi

Water industrial refrigeration systems Modular air-cooled industrial water chillers, for indoor and outdoor installation, equipped with high priority centrifugal fans. The UNI chillers series consists of one compressor, the TWIN chillers series of two compressors and two indipendent refrigeration circuits, the MULTI chillers series of four compressors and four indipendent refrigeration circuits. Water industrial refrigeration systems with cooling capacities from 31 to 404 kW.

ASSIGNED CATEGORY

Coolants
More about this product
SFA

SFA

Modular air-cooled centralized industrial refrigeration plants with cooling capacity from 430 to 880 kW, suitable for outdoor installation. Centralized refrigeration plants models with two refrigeration circuits and two semi-hermetic screw compressors which may be used as a single unit or which can be installed in parallel for higher capacity cooling systems.

ASSIGNED CATEGORY

Coolants
More about this product
TB-P

TB-P

Pressurized water mould temperature controller with operating temperature up to 140°C. The pressurized temperature controller is equipped with high pressure/high flow pumps . The pressurized temperature controllers are available in the version with one heating element and in the version with two heating elements.

ASSIGNED CATEGORY

Temperature Cotroller
More about this product
TBH-OHT

TB-OH

Oil temperature controller to operate up to 190 °C (TBH-OH series) and to operate up to 250°C (TBH-OHT series). Polymers such as PTFE, PEEK, PSU, PPS, PES, LCP, PEI require much higher mould temperatures than other materials. This oil temperature controller is also suitable for various applications: extrusion, food, chemical etc.

ASSIGNED CATEGORY

Temperature Cotroller
More about this product
Microbox

Microbox

Water molds compact temperature controller for operation up to 90°C, equipped with reversible pumps. The compact design of this temperature control unit ensure reduced overall dimensions. Two wheels in the back enable easy move also in narrow spaces. Indirect cooling with large surface finned coil which grants high cooling capacity .

ASSIGNED CATEGORY

Temperature Cotroller
More about this product
TB-S

TB-S, TB-M & TB-D

Water temperature controller available also in oil and water/oil versions, equipped with open tank, suitable to operate in pressure or in vacuum mode with working temperatures up to 90°C (water) or 150°C (oil). This temperature controller is available in various models: temperature controller with one heating element (TB-S), or with two heating elements and automatic partialization (TB-M), or temperature controller with double zones of thermoregulation (TB-D).

ASSIGNED CATEGORY

Temperature Cotroller
More about this product
Dual T

Dual T

Dynamic temperature controller that use rapid alternation between cold water flows and pressurized hot water flows. The dynamic temperature controller Dual T rapidly sends in alternation water flows at different temperatures (hot flow max. 180°C and cold flow min. 8°C). This temperature control unit allows for the injection of plastic into the preheated mould using the hot water flow (obtaining the maximum quality moulded part). Subsequently, by introducing cold water into the mould, it allows to quickly extract the piece as the solidification process of the same is accelerated.

ASSIGNED CATEGORY

Temperature Cotroller
More about this product
MCBalance

MCBalance

The MCBalance is the highest standard in gravimetric dosing. It proves its value on a daily basis in all branches, under all circumstances in injection molding, blow molding and extrusion. The dosing cylinder and patented weighing technology ensure extremely accurate dosing, even when low dosage rates are required. In this way, high savings on expensive additives can be achieved. The continuous loss-in-weight measuring feature and automatic motor speed adjustment are key to a stable production process. This guarantees high quality end products and fewer rejects.

ASSIGNED CATEGORY

Dosing Units
More about this product
MCHybrid

MCHybrid 30

Home Products Gravimetric dosing MCHybrid 30 MCHybrid 30: the best of dosing and blending in one system The MCHybrid 30* is a unique dosing concept that combines two technologies into one system: batch blending and in-line dosing. The main materials or regrinds are mixed in an extreme compact gravimetric batch blender. Because the system only blends the main materials, the blending speed is high and therefore the batch blender remains small. The additives are dosed gravimetrically in-line, directly on the throat of the injection molding machine or extruder. By using these two blending and dosing technologies in one machine, you are able to control the main materials in any given ratio and at the same time dose additives at low percentages with unequalled accuracy.

ASSIGNED CATEGORY

Dosing Units
More about this product
MCTwin

MCTwin

Reusing rejects and sprues in the form of regrind can result in saving substantial amounts of colorant. The secret? Dosing masterbatch, powder, liquid or another additive and regrind simultaneously. One dosing unit of the MCTwin functions as the master unit and doses regrind, while the second operates in conjunction with the master unit and doses the additive. In practice this means that the more regrind is available, the less colorant is added. This enables you to avoid overconsumption of additives and to reuse the maximum of regrind. The process is fully automatic, so you always dose the maximum percentage of available regrind. The quality remains constant, production run after production run, 24/7.

ASSIGNED CATEGORY

Dosing Units
More about this product
MCNexus

MCNexus

The revolutionary MCNexus is the new standard for dosing extreme small amounts of masterbatch. It is an ultra-compact dosing unit, able to dose pellet by pellet masterbatches or additives in various shapes and sizes. The working principle is simple. A standard compressed air supply creates vacuum via an air cardridge. A dosing disc captures the individual pellets piece by piece. Optional feature on the MCNexus is a mini hopper loader or a mounting bracket for air components (Air on Deck). Finally, the pellet is discharged with the same compressed air. Result: counting pellets with 100% accuracy. To reduce the number of components the MCNexus is manufactured by 3D printing. This gives the opportunity to customize the connection to the production machine.

ASSIGNED CATEGORY

Dosing Units
More about this product
MC30

MC30 Auto Calibrate

The MC30 is together with the MC12 and MC18 our showpiece in volumetric dosing. These dosing units have proved their value since Movacolor started. The units are installed in factories all over the world and can operate under almost any conditions. Depending on the material, the unit can be tailor-made for dosing free-flowing powders, regrinds or normal granulates. The units add additive on the basis of volume. The MC30 can be pre-calibrated to dose at percentage rates. The Movacolor dosing cylinder® in combination with the stepper motor ensures maximum control with no stoppages or pulsations. The MC30 can be equipped with an automatic hopper loader for automatically filling the stainless steel hopper.

ASSIGNED CATEGORY

Dosing Units
More about this product
MC18

MC18 Synchronic

The MC18 is together with the MC12 and MC30 our showpiece in volumetric dosing. These dosing units have proved their value since Movacolor started. The units are installed in factories all over the world and can operate under almost any conditions. Depending on the material, the unit can be tailor-made for dosing free-flowing powders, regrinds or normal granulates. The units add additive on the basis of volume. The MC18 unit is controlled by rpm setting. The Movacolor dosing cylinder® in combination with the stepper motor ensures maximum control with no stoppages or pulsations. The MC18 can be equipped with an automatic hopper loader for automatically filling the stainless steel hopper.

ASSIGNED CATEGORY

Dosing Units
More about this product
MC12

MC12 Economy

The MC12 is together with the MC18 and MC30 our showpiece in volumetric dosing. These dosing units have proved their value since Movacolor started. The units are installed in factories all over the world and can operate under almost any conditions. Depending on the material, the unit can be tailor-made for dosing free-flowing powders, regrinds or normal granulates. The units add additive on the basis of volume. The MC12 unit is controlled by rpm setting. The Movacolor dosing cylinder® in combination with the stepper motor ensures maximum control with no stoppages or pulsations. The MC12 Economy volumetric in-line dosing unit is the entrance model of all Movacolor dosing systems for injection molding or extrusion.

ASSIGNED CATEGORY

Dosing Units
More about this product
MCMicro

MCMicro

MCMicro is an ultra-compact dosing unit, especially developed for small injection molding machines. Its small size and the accurate stepper motor drive enable you to dose additives in-line on the smallest machines on the market. You can use the MCMicro for normal granulates and micro granulates. It is equipped with a quick release coupling, allowing easy color change. For different small injection molding machines we have adapters available. The MCMicro comes with a MC12 controller. The masterbatch hopper has a volume of 200 ml. The unit can also be supplied with an optional integrated hopper loader for the main material and MC18 controller. The main material hopper can contain 1.8 liter.

ASSIGNED CATEGORY

Dosing Units
More about this product
Metron 05D

Metron 05D

DIVERTIBLE TUNNEL METAL DETECTOR FOR INSTALLATION IN BELT CONVEYORS, VIBRATORY CHUTES AND MATERIAL SLIDES.

  • Detects all metals in solid products or as loose parts.
  • High sensitivity in rough industrial environments.
  • User friendly and reliable Technology, proven for many years.
  • A worthwhile investment that protects the valuable production equipment.
  • Quick and easy to install.
  • Specifically tailored system solutions with reliable conveying technology and selected accessories.

ASSIGNED CATEGORY

Metal detectors
More about this product
Metron 03 SL

Metron 03SL

METRON 03 SL COMPACT PLATE METAL DETECTOR FOR THE INSTALLATION IN SMALL LOAD BELT CONVEYORS.

  • Detects all metals as inclusions or as loose parts
  • For smaller bulk heights or for the inspection of hollow bodies
  • Does not require a „metal-free zone“
  • Quick and easy to install
  • High sensitivity in rough industrial environments
  • Excellent machine protection despite small investment costs
  • User friendly and reliable technology, proven for many years

ASSIGNED CATEGORY

Metal detectors
More about this product
Quicktron 03

Quicktron 03R

METAL SEPARATOR FOR THE INSPECTION OF GRANULES AND FLAKES IN FREE FALL

  • Detects and separates all metals as entrapments or loose parts
  • Outstanding Price / performance ratio
  • Ideal standard solution for regrind quality assurance and machine protection
  • Compact and easy to integrate

ASSIGNED CATEGORY

Metal detectors
More about this product
P-Tron 03 FM

P-TRON 03 FM

FOR INTERMITTENT VACUUM CONVEYING LINES

  • detects and separates any type of metal, loose or encapsulated
  • flexible integration into existing conveying systems, independent of direction, quick and cost-effective
  • easy to operate
  • high-precision metal detection, extremely reliable
  • uncompromising safety, thanks to mesuSafetyPack

ASSIGNED CATEGORY

Metal detectors
More about this product
KTX50

Mini Dryer KTX50

Drying of hygroscopic plastic materials for small throughputs. directly on the processing machines.

  • Drying temperatures up to 120°C/160°C
  • Power requirement 230volt AC
  • Small in size, offering complete mobility
  • Drying hopper made from stainless steel

ASSIGNED CATEGORY

Dryers
More about this product
KTX120-180

Compact Dryer KTX 120/180

The compact driers for smaller throughputs are cost efficient models. They work on time related regeneration for the drying agent and could handle drying silos from 100 to 400 litres.

ASSIGNED CATEGORY

Dryers
More about this product
KTX200-2000

Drying Systems KTX 200-2000

Full automatically drying of hygroscopic materials with dry air in a closed loop system. Fast and easy cleaning are provided on the square drying silos.

  • Unattended to climatic conditions
  • Two-cartridge desiccant drier with fully automatic regeneration
  • PLC-controlled for easy operating
  • Safety temperature limiter
  • Insulated drying silos manufactured from aluminium or stainless steel

ASSIGNED CATEGORY

Dryers
More about this product
edry

eDry Granular Drying

The new dryer generation 2.0 by SIMAR features optimized energy effiency and an improved reliabilitiy of opration. The eDry combines these advantages with innovative control elements, which mirrow the straightforward controllabilitiy of the operation data. The new technology is based on a recently developed desiccant bed combined with an innovative valve technologie that drastically changes the regeneration process.

  • two cartrigde desiccant dryer with eDry technologie
  • Almost constant dew point up to -65 °C
  • No oscilations due to climatic influenzes
  • User-friendly PLC control with touch display
  • Process driven maintenace schedule

ASSIGNED CATEGORY

Dryers
More about this product
AL-PA

Conveyor AL-PA

ASSIGNED CATEGORY

Conveyor belts
More about this product
AL-PA Robot

Conveyor AL-PA Robot

ASSIGNED CATEGORY

Conveyor belts
More about this product
AL-FV

Conveyor AL-FV

ASSIGNED CATEGORY

Conveyor belts
More about this product
AL-CB

Conveyor AL-CB/CBS

ASSIGNED CATEGORY

Conveyor belts
More about this product
AL-CBD

Conveyor AL-CBD/CBDS

ASSIGNED CATEGORY

Conveyor belts
More about this product
VBD1000

Vacuum Dryer VBD

Maguire Vacuum Dryers are proven to dry polymers in a fraction of the time and with 60% less energy than desiccant dryers

  • Improved design obsoletes moving canisters and minimizes moving parts
  • Continuous batch drying process
  • -40° dew point air is bled into vacuum and retention hoppers
  • Vertical design minimizes footprint.n Double-insulation on all vessels guarantees no heat loss
  • Reduced Maintenance – no desiccant to change – no filters to clean
  • Faster drying improves production planning
  • “No stress” material drying – means no material degradation.

ASSIGNED CATEGORY

Dryers
More about this product
WSB-MB

MB Micro Blender

  • 5 model available
  • Up to 45 kg/h
  • Ideal for small injection machines
  • Removable hoppers for quick color changes
  • Up to 4 components

ASSIGNED CATEGORY

Dosing Units
More about this product
WSB-140

WSB 100 Serie

  • 5 model available
  • Up to 200 kg/h
  • For injection molders and small extruders
  • Removable hopper option for quick color changes
  • Up to 4 components

ASSIGNED CATEGORY

Dosing Units
More about this product
WSB-240

WSB 200 Serie

  • 12 model available
  • Up to 400 kg/h
  • For injection molders, small extruders and central blending
  • Removable hopper option for quick color changes
  • Up to 8 components

ASSIGNED CATEGORY

Dosing Units
More about this product
WSB-440

WSB 400 Serie

  • 12 model available
  • Up to 650 kg/h
  • For small to medium extruders, large injection machines and central blending
  • Removable hopper option
  • Up to 8 components

ASSIGNED CATEGORY

Dosing Units
More about this product
WSB-960

WSB 900 Serie

  • 21 model available
  • Up to 1.800 kg/h
  • Designed for large extruders, blown film lines and central blending systems
  • 2, 4 or 6 compartment hoppers
  • Up to 6 feeders

ASSIGNED CATEGORY

Dosing Units
More about this product
Do you have any questions?
Contact us
Contact